• <em id="gxpaq"></em>
    <button id="gxpaq"></button>
    1. <th id="gxpaq"></th>
      <rp id="gxpaq"></rp>
    2. <rp id="gxpaq"><samp id="gxpaq"><blockquote id="gxpaq"></blockquote></samp></rp>
    3. <label id="gxpaq"></label>
    4. Unwedge screenshot
      SOFTWARE :Unwedge
      DEVELOPER :Rocscience
      VERSION :4.0
      PLATFORM :Windows
      FILE SIZE :90.13 MB
      LICENSE :Trial
      DOWNLOADS :UserDownloads:1048
      Unwedge Description

      Unwedge is a 3D stability analysis and visualization program for underground excavations in rock containing intersecting structural discontinuities. Safety factors are calculated for potentially unstable wedges and support requirements can be modeled using various types of pattern and spot bolting and shotcrete. Use Unwedge to quickly create a model, perform a safety factor analysis, place reinforcement and interpret the results.

      Unwedge's Windows-based interface provides an easy to use, graphical environment for data entry and visualization that greatly simplifies the analysis and design process. Popup windows allow for easy entry and modification of model parameters, and easy to use editing tools provide a convenient method for performing parametric studies. The graphical data interpreter provides a rich set of tools, including 3D animation, for the convenient display of wedges surrounding the excavation.

      In addition to allowing for simple point and click geometry input/editing, Unwedge provides enhanced support models for bolts, shotcrete and support pressures, the ability to optimize tunnel orientation and an option to look at different combinations of three joint sets based on a list of more than three joint sets. Unwedge uses a new analysis engine based on Goodman and Shi's block theory, which includes the ability to incorporate induced stress around the excavation and the effect on stability, new strength models such as Barton-Bandis and Power Curve, and the ability to improve the scaling and sizing of wedges.

      * Unwedge download link provides trial version of the software.

      Similar Software
      Swedge Version:6.0 · Rocscience
      Swedge

      3D Surface Wedge Analysis for Slopes

      Swedge is a quick, interactive and simple to use analysis tool for evaluating the geometry and stability of surface wedges in rock slopes.

      Examine3D Version:4.1 · Rocscience
      Examine3D

      3D Engineering Analysis for Underground Excavations

      Examine3D is an engineering analysis program for underground excavations in rock.

      Examine2D Version:8.0 · Rocscience
      Examine2D

      2D Stress Analysis for Underground Excavations

      Examine2D is a 2-dimensional plane strain indirect boundary element program for the elastic stress analysis of underground excavations.

      RocTopple Version:1.0 · Rocscience
      RocTopple

      Toppling Stability Analysis

      RocTopple is an interactive software tool for performing toppling analysis and support design of rock slopes.

      CPillar Version:4.0 · Rocscience
      CPillar

      3D Crown Pillar Stability Analysis

      CPillar is a quick, interactive, and easy-to-use analysis tool for evaluating the stability of surface or underground crown pillars, and laminated roof beds.

      Slide Version:8.0 · Rocscience
      Slide

      2D Limit Equilibrium Slope Stability Analysis

      Slide is the most comprehensive slope stability analysis software available, complete with finite element groundwater seepage analysis, rapid drawdown, sensitivity and probabilistic analysis and support design.

      Comments & Reviews About Unwedge

      No comments yet. Be the first to comment.

      Submit a review using your Facebook ID

      Rate This Software

      Unwedge has been rated 5.0 out of 5 points. A total of 1 votes cast and 0 users reviewed the software.

      Most Popular Geotechnical Engineering Downloads

      6264 hitsPOLEFDN 2.3

      POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

      4664 hitsAllPile 7.19

      AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), uplift anchors, uplift plate, and shallow foundations.

      4653 hitsDips 7.0

      Dips is designed for the interactive analysis of orientation based geological data.

      3671 hitsPILEGRP 3.6

      PILEGRP is a spreadsheet program written in MS-Excel for the purpose of analysis of pile groups with rigid caps using the elastic method.

      Recently Added Geotechnical Engineering Software

      22 NovDartis Lab 1.0

      Dartis Lab is a geotechnical software for easily processing lab test data. Dartis Lab features Water content, Index, Specific gravity, Particle size and USCS classification of soil.

      24 SepRE Shoring Wall 2017

      RE Shoring Wall is state-of-the-art software for designing shoring systems using current industry standards and methods. Shoring Design, Lagging Design, and Lateral Soil Pressure Analysis tools are combined into one powerful, user-friendly application.

      23 AugPileSuite 1.0

      PileSuite is a powerful suite of software products for deep foundation analysis and design for both onshore and offshore projects.

      24 JunDartisLog 1.0

      DartisLog is a bore log software that will help users to create soil borehole logs specially adjusted for the Geotechnical Engineer.

      炸金花打伙牌技巧